Serving North & South Metro Atlanta · Open 7 days, 6 AM – 8 PMCall (678) 490-6359
Finished cedar fence with PostMaster steel posts hidden behind wood wraps
No-Dig Steel Posts · Driven PostMaster · Limited Lifetime Warranty

No-Dig PostMaster Steel Post Fences

A wood fence built on galvanized steel posts driven into the ground — no concrete, less disruption to your yard, and a limited lifetime warranty on the posts.

No-Dig Steel Posts

A wood fence on a steel foundation

PostMaster is a family of galvanized steel fence posts from Master Halco, made as an alternative to wood posts and traditional round metal posts. The posts are G90 galvanized steel (also available in a textured black powder coat) with a “hat” profile that can be covered or left as an accent. Unlike wood, they will not twist, rot, warp, or crack.

A to Z Fencing installs PostMaster posts by driving them into the ground with professional post-driver equipment. Master Halco lists driving with a powered post driver as an approved method, along with setting posts in concrete. Driven posts mean no wide holes and no concrete pour, so there is less mess in your yard and no waiting for concrete to cure.

We wrap the steel posts in wood for a clean, traditional look. You get the strength of steel in the ground, and a finished fence that looks like a wood fence.

  • Free, no-obligation estimate
  • Limited lifetime warranty on the PostMaster posts
  • 1-year craftsmanship warranty
  • Steel posts wrapped in wood for a traditional look
Get a free no-dig PostMaster fence quote
PostMaster steel posts during installation, before wood post wraps

Why driven steel posts outperform wood posts in concrete

They won’t rot, warp, or crack

Master Halco designed PostMaster posts so they will not twist, rot, warp, or crack the way wood posts do. Georgia heat, humidity, and clay soils that hold moisture are hard on wood in the ground. Termites don’t eat steel.

Rated for higher wind loads

Master Halco rates PostMaster line posts at 81.2 mph (ultimate, under ASCE 7-10 / IBC 2012). In the same manufacturer comparison, a 4×4 cedar post is shown at 49 mph and a 4×4 redwood post at 59 mph, and the company notes that a wood post’s wind resistance declines after installation. These are manufacturer ratings under stated test conditions, not a promise about every storm.

Limited lifetime warranty on the posts

The posts are backed by Master Halco’s limited lifetime warranty for the original residential purchaser, for as long as you own your home, with stated exclusions. The full terms are summarized below, with a link to the official warranty.

No concrete, less yard disruption

Driven installation doesn’t require digging wide post holes or mixing concrete, so your lawn stays in better shape and the fence doesn’t wait on a concrete cure. Master Halco also notes that posts driven properly below the frost line help protect a fence from frost heave.

Works with the wood fence style you want

PostMaster is built for wood fences — vertical, horizontal, open picket, board-on-board, shadow box, and more. We’ll tell you if it’s a fit for your project during your free estimate.

A finished wood look

After the posts are in, we wrap them in wood so the steel is hidden and the fence has a clean, traditional appearance.

How we install it

Driven posts, then a finished wood fence

Master Halco approves driving PostMaster posts with professional equipment. That is the no-dig method we use, then we wrap the steel in wood.

Layout

We mark the fence line, post spacing, and gate openings, and check for underground utilities before any posts go in.

Drive the posts

We drive the galvanized steel PostMaster posts into the ground with professional post-driver equipment. There is no wide hole and no concrete.

Build the fence

Rails and boards go on the posts in the wood style you chose, such as privacy, cap and trim, or board-on-board.

Wrap the posts

We wrap the steel posts in wood for a clean, traditional look, so the steel is hidden and the fence looks like a wood fence.

The limited lifetime warranty, in plain language

Master Halco backs PostMaster galvanized steel and powder-coated textured black fence posts with a limited lifetime warranty. That is not an unlimited “full lifetime” warranty, and it applies to the posts themselves, not the wood boards or the labor to replace a post. Our 1-year craftsmanship warranty still covers our workmanship. Here is what the official warranty says:

  • For the original residential purchaser, Master Halco warrants the posts free from defects in material or workmanship, including structural failure, for as long as you own your home. “Structural failure” is a permanent bend of more than 5%.
  • Coverage is limited to the original purchaser. If the original purchaser is a corporation, partnership, church, school, or other organization, the warranty period is 20 years from the date of original purchase.
  • The warranty applies to systems built entirely of components manufactured or supplied by Master Halco. Hardware and other products have their own warranties and are not covered under this one.
  • It does not cover accident, unreasonable use, neglect, alteration, improper service, improper installation, or acts of God. It also does not cover the cost of installation, removal, or reinstallation, or the natural formation of rust on the post.
  • Use in harsh industrial, coastal, or marine environments is not warranted. Damage from wind loads exceeding 81 mph (Ultimate) for Exposure “B,” as determined under the 2015 International Building Code, is not covered.
  • Master Halco recommends returning the registration form within 30 days of purchase, but coverage is not conditional on mailing the form if you can prove the posts were supplied by Master Halco and meet the requirements. The warranty applies to systems installed in the United States and Canada.

Read the official PostMaster v3 limited lifetime warranty (PDF) for the full terms, or see our warranty page for how this fits with our 1-year craftsmanship warranty.

FAQ

Common questions about no-dig PostMaster fence

What is a no-dig PostMaster fence?

It’s a wood fence built on PostMaster galvanized steel posts that we drive into the ground with professional equipment, instead of digging wide holes and setting posts in concrete. Master Halco, which makes PostMaster, lists driving with a powered post driver as an approved installation method. After the posts are in, we wrap them in wood for a clean, traditional look.

Is the warranty really a lifetime warranty?

It is a limited lifetime warranty, not an unlimited one. For the original residential purchaser, Master Halco warrants the posts against defects in material or workmanship, including structural failure (a permanent bend of more than 5%), for as long as you own your home. If the purchaser is a business, church, school, or other organization, coverage is 20 years from the date of purchase. It does not cover improper installation, acts of God, harsh coastal or marine environments, natural rust, labor to replace a post, or damage from wind loads exceeding 81 mph (ultimate) for Exposure B under the 2015 International Building Code. The official warranty PDF has the full terms. Our 1-year craftsmanship warranty still covers our workmanship.

Will I see the steel posts on the finished fence?

Not on a finished A to Z install. We wrap the steel posts in wood for a clean, traditional look, so the steel is hidden. The photos on this page show the back of a cedar privacy fence during installation, before the wraps go on, and after the posts have been boxed in with wood.

Why not just set wood posts in concrete?

Wood posts can rot, warp, twist, or crack, and they can be damaged by termites. Moisture in Georgia clay and humidity makes that worse at the ground line. Steel posts don’t rot, and Master Halco rates them for higher wind loads than the wood posts in its comparison chart. Driving them also avoids a concrete pour and the yard disruption that comes with digging wide holes.

Which fence styles can use PostMaster posts?

Master Halco makes PostMaster for wood fences, including vertical, horizontal, open picket, board-on-board, and shadow box styles. We offer the system on applicable wood fence projects and will tell you if it’s a fit during your free estimate.

Do you install this in Cumming, Gainesville, and Peachtree City?

Yes. We install no-dig PostMaster steel post fences in Cumming, Gainesville, Peachtree City, and the surrounding communities we already serve.

Where we offer no-dig PostMaster fence

We serve Cumming, Gainesville, Peachtree City, and surrounding communities in Forsyth, Hall, and Fayette Counties.

Related services

Ready for a fence you’ll be proud of?

Tell us about your project and we’ll set up a free, no-obligation estimate.